Update factory reset procedure in README and main.cpp for clarity and functionality

README.md

@@ -79,12 +79,15 @@ After connecting, the device is reachable at:
 
 ### Factory reset (forgot password)
 
-If you lose the web UI password, hold the **BOOT button** (GPIO0) for 3 seconds during startup. The firmware resets all settings to factory defaults **except** meter pin assignments and calibration (maxDuty), which are preserved. On acknowledgement, all connected meters sweep 0→100→0.
+If you lose the web UI password, **reset the device 5 times in quick succession** (press the EN button or cycle power 5× within a few seconds — before the boot completes). The firmware resets all settings to factory defaults **except** meter pin assignments and calibration (maxDuty), which are preserved. On acknowledgement, all connected meters sweep 0→100→0.
 
-Serial output confirms the reset:
+Serial output shows the progress:
 
 ```
-[BOOT] BOOT button held, hold 3s for factory reset...
+[BOOT] reset count 1/5
+[BOOT] reset count 2/5
+...
+[BOOT] reset count 5/5, triggering factory reset
 [BOOT] factory reset triggered!
 ...
 [BOOT] factory reset complete, restarting...
@@ -236,4 +239,4 @@ Config is stored as JSON in LittleFS at `/config.json`.
 }
 ```
 
-The file is written by the web UI and should not need manual editing. To reset to factory defaults (keeping pin/calibration), hold the BOOT button for 3 seconds at startup. To erase everything including flash, use `pio run --target erase`.
+The file is written by the web UI and should not need manual editing. To reset to factory defaults (keeping pin/calibration), reset the device 5 times in quick succession. To erase everything including flash, use `pio run --target erase`.

src/main.cpp

@@ -613,7 +613,7 @@ static void startServer() {
 }
 
 // ---------------------------------------------------------------------------
-// Factory reset (hold BOOT button 3s at startup)
+// Factory reset (rapid reset 5× within a few seconds)
 // ---------------------------------------------------------------------------
 
 static void factoryReset() {
@@ -699,19 +699,25 @@ static void factoryReset() {
 }
 
 static void checkFactoryReset() {
-  pinMode(0, INPUT_PULLUP);
+  const int THRESHOLD = 5;
-  delay(10);
+  int count = 0;
-  if (digitalRead(0) == LOW) {
+  File f = LittleFS.open("/reset_count", "r");
-    Serial.println("[BOOT] BOOT button held, hold 3s for factory reset...");
+  if (f) {
-    unsigned long start = millis();
+    count = f.parseInt();
-    while (millis() - start < 3000) {
+    f.close();
-      delay(50);
+  }
-      if (digitalRead(0) != LOW) {
+  count++;
-        Serial.println("[BOOT] factory reset aborted (button released)");
+  if (count >= THRESHOLD) {
-        return;
+    LittleFS.remove("/reset_count");
-      }
+    Serial.printf("[BOOT] reset count %d, triggering factory reset\n", count);
-    }
     factoryReset();
+    return;
+  }
+  f = LittleFS.open("/reset_count", "w");
+  if (f) {
+    f.print(count);
+    f.close();
+    Serial.printf("[BOOT] reset count %d/%d\n", count, THRESHOLD);
   }
 }
 
@@ -754,6 +760,7 @@ void setup() {
   startMDNS();
   mqttReconnectAt = 0;
 
+  LittleFS.remove("/reset_count");
   Serial.printf("[BOOT] ready at http://%s.local or http://%s\n",
                 hostname, WiFi.localIP().toString().c_str());
 }